# lsusb
Bus 003 Device 002: ID 2659:1405 Sundtek


# dmesg | grep -i sund
[  199.958115] usb 3-1: Manufacturer: Sundtek
[  200.642541] input: Sundtek Remote Control as /devices/virtual/input/input13


# lsmod | grep -i Sund
(nichts gefunden)


# dmesg | grep -i dvb
(nichts gefunden)


# w_scan -fs -s S19E2 -c DE -X 2>  channels.conf
   -----   output begin:
w_scan version 20130331 (compiled for DVB API 5.10)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format czap/tzap/szap/xine
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
<------>/dev/dvb/adapter0/frontend0 -> SATELLITE "Sundtek DVB-S/S2 (IV)": very good :-))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_.
Using DVB API 5.a
frontend 'Sundtek DVB-S/S2 (IV)' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.93GHz ... 2.17GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_.
trying 'S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK'
(time: 00:02) diseqc_send_msg: FE_DISEQC_SEND_MASTER_CMD failed.
diseqc_send_msg: SEC_TONE_OFF failed.
set_frontend:1849: ERROR: Setting frontend parameters failed (API v5.x)
: 32 Broken pipe

initial_tune:2271: Setting frontend failed S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK
trying 'S  f = 10744 kHz H SR = 22000  5/6 0,35  QPSK'
(time: 00:02) diseqc_send_msg: SEC_TONE_OFF failed.
diseqc_send_msg: SEC_TONE_OFF failed.
set_frontend:1849: ERROR: Setting frontend parameters failed (API v5.x)
: 32 Broken pipe

initial_tune:2271: Setting frontend failed S  f = 10744 kHz H SR = 22000  5/6 0,35  QPSK
trying 'S  f = 10759 kHz V SR = 22000  5/6 0,35  QPSK'
....
....
....
initial_tune:2271: Setting frontend failed S  f = 12722 kHz H SR = 22000  5/6 0,35  QPSK
trying 'S  f = 12729 kHz V SR = 22000  5/6 0,35  QPSK'
(time: 00:07) diseqc_send_msg: SEC_TONE_OFF failed.
diseqc_send_msg: SEC_TONE_OFF failed.
set_frontend:1849: ERROR: Setting frontend parameters failed (API v5.x)
: 32 Broken pipe

initial_tune:2271: Setting frontend failed S  f = 12729 kHz V SR = 22000  5/6 0,35  QPSK

ERROR: Sorry - i couldn't get any working frequency/transponder
 Nothing to scan!!
   -----   output end


# locate sundtek | tee locate-sundtek.txt
/etc/hal/fdi/preprobe/sundtek.fdi
/etc/systemd/system/multi-user.target.wants/sundtek.service
/etc/udev/rules.d/80-mediasrv-sundtek.rules
/etc/udev/rules.d/80-remote-sundtek.rules
/lib/systemd/system/sundtek.service
/lib/udev/rules.d/80-mediasrv-sundtek.rules
/lib/udev/rules.d/80-remote-sundtek.rules
/opt/bin/extension/sundtek32decoder
/opt/doc/sundtek.conf
/opt/doc/sundtek.service
/opt/doc/sundtek_vcr_remote.conf
/opt/doc/sundtek_vdr.conf
/root/TV-DBT/sundtek_installer_170219.223954.sh
/root/TV-DBT/sundtek_netinst.sh


 # /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate IV]  DVB-S/S2, ANALOG-TV, REMOTE-CONTROL, OSS-AUDIO
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 3-1
  [SERIAL]:
     ID: U140919010952
  [DVB-S/S2]:
     FESTATUS: STANDBY
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video0
     VBI0: /dev/vbi0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0


# /opt/bin/mediaclient -m DVBS2 -f 964000 -M QPSK -S 22000000 -V H -E 5/6
Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using real frequency: 964000
Modulation: QPSK (DVB-S)
Symbolrate: 22000000
Voltage: 18 Volt (Horizontal)
FEC: 5/6
Tone OFF
Frequency: 964000
Syntax OK
Checking for lock:
..........


# /opt/bin/mediaclient --listrc
listet Tabelle Keymaps

---------------------------

aktiviert mediaclient:
mediaclient -d /dev/dvb/adapter0/frontend0